| 基本特性FEATURES | 主要应用APPLICATIONS |
| 优异的机械性能 Excellent mechanical properties | 注塑成型 Injection molding 应用于汽车、电器、电动工具等行业。 Applied in industries such as automobiles, appliances, and electric tools. |
| 自润滑性、耐摩性好 Good self-lubricating and friction resistance |
|
| 耐热性好 Good heat resistance |
| 性能 Properties | 测试标准 IS0 | 测试条件 Test Condition | 国际单位 Unit | 典型值[1] Typical Values |
| 物理性能 Physical Properties | ||||
| 密度 Density | 1183 | 23℃ | g/cm³ | 1.35 |
| 玻纤含量 Glass Fiber Content | 马弗炉 | 800℃ | % | 30 |
| 收缩率 Mold Shrinkage | 内部方法 | 3.00mm,干燥 | % | 0.3-0.4 |
| 机械性能 Mechanical Properties | ||||
| 拉伸强度 Tensile Strength | 527 | 10mm/min | MPa | 150 |
| 伸长率 Elongation at break | 527 | 10mm/min | % | 7 |
| 弯曲强度 Flexural Strength | 178 | 2mm/min | MPa | 235 |
| 弯曲模量 Flexural Modulus | 178 | 2mm/min | MPa | 8500 |
| 冲击强度（缺口）IZOD Impact Strength | 180 | 23℃ | KJ/m² | 14 |
| 热学性能 Thermal Properties | ||||
| 热变形温度HDT | 75-2 | 1.80MPa | ℃ | 195 |
| 可燃性 Flammability | ||||
| 阻燃性 Flammability | UL94 | - | - | HB |
[1]典型值是指实验室平均数据，仅用于使用时的参考，不作为产品使用的标准。
Typical values is the average laboratory data, for use reference,only not as a product standards.
| 干燥温度 Dry Temperature | 90-110℃ |
| 干燥时间 Dry Time | 4-6h |
| 注嘴温度 Nozzle Temperature | 260-270℃ |
| 前段温度 Front Temperature | 250-260℃ |
| 中段温度 Middle Temperature | 250-260℃ |
| 后段温度 Rear Temperature | 240-250℃ |
| 模具温度 Mold Temperature | 80-100℃ |
以上数值仅供注塑机参考使用，可根据不同机型、不同模具以及产品要求，对上述参数做适当调整。
The above-mentioned data is for injection reference, should adjust according to the difference of the machines andmolds and the specific requirement of the products.
使用前应检查其包装在运输过程中是否破损。物料应储存在阴凉干燥处，一旦破袋使用结束，应将剩余物料密封保存。
Before use, the packaging should be checked for damage during transportation. Materials should be stored in a cool and dry place. Once the bag is broken and used, the remaining materials should be sealed and stored.
