| 基本特性FEATURES | 主要应用APPLICATIONS |
| 优异的机械性能 Excellent mechanical properties | 注塑成型 Injection molding 应用于电子电器、汽车工业等 Applied to electronics, automotive industry, etc |
| 易加工 Easy processing | |
| 尺寸稳定性 Dimensional stability |
| 性能 Properties | 测试标准 IS0 | 测试条件 Test Condition | 国际单位 Unit | 典型值[1] Typical Values |
| 物理性能 Physical Properties | ||||
| 密度 Density | 1183 | 23℃ | g/cm³ | 1.05 |
| 收缩率 Mold Shrinkage | 内部方法 | 3.00mm,干燥 | % | 0.3-0.6 |
| 熔融指数 MFR | 1133 | 220℃×10kg | g/10min | 22 |
| 机械性能 Mechanical Properties | ||||
| 拉伸强度 Tensile Strength | 527 | 50mm/min | MPa | 39 |
| 伸长率 Elongation at break | 527 | 50mm/min | % | 15 |
| 弯曲强度 Flexural Strength | 178 | 2mm/min | MPa | 65 |
| 弯曲模量 Flexural Modulus | 178 | 2mm/min | MPa | 2000 |
| 冲击强度（缺口）IZOD Impact Strength | 180 | 23℃ | KJ/m² | 20 |
| 可燃性 Flammability | ||||
| 阻燃性 Flammability | UL94 | - | - | HB |
[1]典型值是指实验室平均数据，仅用于使用时的参考，不作为产品使用的标准。
Typical values is the average laboratory data, for use reference,only not as a product standards.
| 干燥温度 Dry Temperature | 80℃ |
| 干燥时间 Dry Time | 2-4h |
| 注嘴温度 Nozzle Temperature | 230-250℃ |
| 前段温度 Front Temperature | 220-240℃ |
| 中段温度 Middle Temperature | 210-230℃ |
| 后段温度 Rear Temperature/td> | 200-220℃ |
| 模具温度 Mold Temperature | 30-80℃ |
以上数值仅供注塑机参考使用，可根据不同机型、不同模具以及产品要求，对上述参数做适当调整。
The above-mentioned data is for injection reference, should adjust according to the difference of the machines andmolds and the specific requirement of the products.
使用前应检查其包装在运输过程中是否破损。物料应储存在阴凉干燥处，一旦破袋使用结束，应将剩余物料密封保存。
Before use, the packaging should be checked for damage during transportation. Materials should be stored in a cool and dry place. Once the bag is broken and used, the remaining materials should be sealed and stored.
